Installation

The process of installing wooden wall panels is not complicated.

Before the actual installation, you need to decide which installation variant suits you better.

The options are:

  1. Installation of finished panels on the substructure (suitable for larger areas)
  2. Gluing individual segments directly to the wall (suitable for smaller areas)

If you want your interior to get a new look quickly and you don’t have a lot of time, then the first option is for you.
Gluing the segments directly to the wall (or some other surface) is ideal if you intend to cover a small detail in the interior.

Let’s go in order.

Wall in the interior

At the beginning, we should emphasize that there are certain prerequisites that need to be met in order for your wooden wall to look perfect after the work is completed.

The surface of the wall on which you plan to install wooden wall panels should first of all be flat. This is especially important if you have decided on the option of gluing the segments directly to the wall.

Zid pre ugradnje

If it is drywall, make sure that the construction is stable. The weight of wooden wall panels for certain models goes up to 13 kg per square meter, so it is important to provide a solid base.

When gluing the segments directly to the wall before the assembly process, make sure that the wall is clean, free of dust and other impurities.

Installation on the substructure

With this method of assembly, we first start by placing the wooden substructure on the wall. The wooden supporting slats are first vertically fixed to the wall with the help of dowels and screws.

Make sure that the distance between the slats is adapted to the length of the panel.

The thickness of the supporting slats is 15 mm.

Zidne obloge montaza

The wooden wall panels are then arranged horizontally and attached to the wooden substructure. Fixing is done with the help of dedicated metal frogs and screws (or nails).

Drvene zidne obloge montaza

Trimming the opening

In places of openings and obstacles on the wall, it is necessary to cut and adjust the panels. The most common case of cutting out is openings for power sockets, switches or shelves. After taking precise measurements, you can do the cutting with a jig saw or hand saw.

Iskrajanje otvora

Panel shortening

During on-site assembly, the end panels are shortened to the required length, against the width of the wall itself.

If necessary, the final row also needs to be adjusted in height, whereby the panels are cut lengthwise.

End moldings

In case that the side of the wooden panels is visible, we suggest you install the end moldings. They will mask the supporting substructure and additionally connect the wooden wall into a whole.

Zavrsna lajsna za zidne obloge

Corner joint

If you are covering two wall surfaces that meet at a certain angle, it is necessary to fit the panels at an angle.

Rodos-stub-u-dnevnom-boravku

Most often it is an angle of 45 degrees. In any case, this procedure must be performed precisely so that the contact between the two wooden panels after joining is optimal and imperceptible.

Gluing of segments

In this variant, the wooden segments are glued directly to the wall or some other surface. It would be ideal if the wall was not plastered, so that the glue would stick better…

Drvene zidne obloge - lepljenje na zid

You have to take care that the rows are straight, and the segments of different lengths and thicknesses are optimally distributed.

Conclusion

Wooden wall panels are an attractive and simple way to give your interior a completely new look. Quick and easy.

Now it’s up to you to choose the desired model. We will make sure that your interior becomes a more comfortable, interesting and pleasant place.